Difference between revisions of "USCSA Race setup with SplitSecond"

From JimboWiki
Jump to: navigation, search
(Setting up combined scoring rules)
(Getting help or providing feedback)
 
(33 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Setting up combined scoring rules ==
+
== Competitor Classes ==
In order for combined results (qualifications, rankings, divisional overall standings) to be calculated, your division must select scoring rulesFor this season, send your selections to James Cialdea by e-mail (see [[#Getting_help_or_providing_feedback|this section]]).  You may have different rules for the Men and Ladies - that is not a problem, just provide information for each and we will take care of the rest.
+
For each race submission, every participating competitor must be assigned one of 5 classesThis class assignment will determine how scoring is handled for the competitor, and the competitor's team. The classes are:
  
The available rules are described belowIf you use a different rule, include that information in the e-mailYou may select one rule and up to three tie breakers for Individual and Team combined scoringYou do not need to select three tie breakers if your division does not have rules for three levels of ties.
+
;A
 +
:For all A-team membersOnly USCSA members may be marked with the "A" class, and a USCSA number must be provided with the submission.  A-team members with the same team abbreviation make up that school's A-team.  This team '''will''' be used to create team results.  The team results '''will''' be used in the divisional standing calculations.  Each competitor '''is eligible''' to score individually.  Each competitor that scores individually '''will''' be included in the divisional individual standings.  All A-team competitors '''will''' receive USCSA race points.
 +
;B
 +
:For all B-team membersOnly USCSA members may be marked with the "B" class, and a USCSA number must be provided with the submission.  B-team members with the same team abbreviation make up that school's B-team.  This team '''will not''' be used to create team results.  The team results '''will not''' be used in the divisional standing calculations.  Each competitor '''is not eligible''' to score individually.  All B-team competitors '''will''' receive USCSA race points.
 +
;Individual
 +
:For all individually qualified members.  Only USCSA members may be marked with the "Individual" class, and a USCSA number must be provided with the submissionIndividual entries '''will not''' be used to create team results.  The team results '''will not''' be used in the divisional standing calculations.  Each competitor '''is eligible''' to score individually.  Each competitor that scores individually '''will''' be included in the divisional individual standings.  All Individual competitors '''will''' receive USCSA race points.
 +
;Unscored/Guest
 +
:For all non-USCSA members, as well as USCSA competitors from divisions other than the division running the event.  USCSA or non-USCSA members may be marked with the "Unscored/Guest" class.  If the competitor is a USCSA member, then a USCSA number should be provided.  Unscored/Guest entries '''will not''' be used to create team results.  Each Unscored/Guest competitor '''is not eligible''' to score individually.  Unscored/Guest competitors '''will''' receive USCSA race points if they are USCSA members and a USCSA number has been provided.  Unscored/Guest competitors '''will not''' receive USCSA race points if a USCSA number has not been provided.
 +
;AA
 +
:For all AA-team members.  This class '''should not be used''' by most divisions.  Only USCSA members may be marked with the "AA" class, and a USCSA number must be provided with the submission.  AA-team members with the same team abbreviation make up that school's AA-team.  This team '''will''' be used to create team results for the race.  The team results '''will not''' be used in the divisional standing calculations.  Each competitor '''is eligible''' to score individually.  Each competitor that scores individually '''will''' be included in the divisional individual standings.  All AA-team competitors '''will''' receive USCSA race points.
  
In other words, fill in this grid:
+
{|style="border-spacing: 0; border-width: 1px; border-style: solid; border-color: #000; padding: 0" border="1"
* Conference Name:
+
|+ USCSA scoring classes
* Division Name:
+
! Class
* Team Combined Rules
+
! Times
** Rule: (select one from Team Combined Rules)
+
! Team Result for Race
** Tiebreaker 1: (select one from Team Combined Rules, or leave blank)
+
! Team Result in Divisional Standings
** Tiebreaker 2: (select one from Team Combined Rules, or leave blank)
+
! Individual Result in Divisional Standings
** Tiebreaker 3: (select one from Team Combined Rules, or leave blank)
+
! Receive USCSA Race Points
* Individual Combined Rules
+
|-
** Rule: (select one from Individual Combined Rules)
+
! A
** Tiebreaker 1: (select one from Individual Combined Rules, or leave blank)
+
| Yes
** Tiebreaker 2: (select one from Individual Combined Rules, or leave blank)
+
| Yes
** Tiebreaker 3: (select one from Individual Combined Rules, or leave blank)
+
| Yes
 
+
| Yes
 
+
| Yes
Example:
+
|-
<pre>
+
! B
Conference Name: Rocky Mountain
+
| Yes
Division Name: Rocky Mountain
+
| No
 
+
| No
Team Combined Rules
+
| No
  Rule: Team Finish Place Sum
+
| Yes
 
+
|-
Individual Combined Rules
+
! Individual
  Rule: World Cup Top 30
+
| Yes
</pre>
+
| No
 
+
| No
=== Individual Combined Rules ===
+
| Yes
For Individual Combined scoring, the following rules are available:
+
| Yes
;Linear, top 30
+
|-
:Points are assigned to the top 30 finishers, counting down linearly from 30. (1st = 30, 2nd = 29, ... , 29th = 2, 30th = 1, 31st = 0, ... , last = 0).  The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
+
! Unscored/Guest
;Linear, top 15
+
| Yes
:Points are assigned to the top 15 finishers, counting down linearly from 15. (1st = 15, 2nd = 14, ... , 14th = 2, 15th = 1, 16st = 0, ... , last = 0).  The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
+
| No
;World Cup, top 30
+
| No
:Points are assigned to the top 30 finishers using the World Cup point scale (see [http://en.wikipedia.org/wiki/FIS_Alpine_Ski_World_Cup#World_Cup_scoring_system this wiki article] - the scale used is the "current system"). The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
+
| No
;Continental, top 15
+
| If USCSA member
:Points are assigned to the top 15 finishers using the World Cup point scale (see [http://en.wikipedia.org/wiki/FIS_Alpine_Ski_World_Cup#World_Cup_scoring_system this wiki article] - the scale used is the "top 15 system"). The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
+
|-
;Race Points
+
! AA
:Sum of race points from FIS/USSA/USCSA formula, lowest score wins.  Racers who do not participate in a race are counted as "DNS", and will take 990.00 points for that race.  (Note: USCSA points are calculated and displayed in results for all USCSA-scored races regardless of whether this option is used.)
+
| Yes
;No scoring
+
| Yes
:Combined results are not calculated
+
| No
 
+
| Yes
=== Team Combined Rules ===
+
| Yes
For Team Combined scoring, the following rules are available:
+
|}
;Team Finish Place Sum
+
:Each team is assigned place points for each race equal to the team ranking at that race.  The sum of finish places for all races is used for combined ranking.  The lowest sum wins.
+
;Individual Finish Place Sum
+
:Sum of finish places for all racers using in scoring for all races.  Dummy finish places will be applied for teams that do not have enough finishers, per USCSA scoring rules.  The lowest sum wins.
+
;Individual Race Point Sum
+
:Sum of race points (FIS/USSA/USCSA formula) for all racers used in scoring.  Dummy points will be added for teams that do not have enough finishers.  The dummy points will be the points that would be assigned if a racer finished with the dummy time for the race where the team did not have enough finishers.  The lowest sum wins.
+
;No scoring
+
:Combined results are not calculated
+
 
+
== How to create a USCSA race from the registration website ==
+
==== Race Registration Website ====
+
*Go to the [http://www.uscsa.com/conferences/add-race.html Race Registration] Page
+
*Fill in '''ALL''' information (Use an easily distinguishable race name)
+
*Select "Add Race"
+
*The race code will be emailed to you.  Use this code when submitting the race to USCSA (later in the process)
+
[[Image:web_registration.png]]
+
 
+
== How to lookup USCSA numbers ==
+
==== Individual racer lookup on uscsa.com ====
+
This feature is not available yet.  Watch here for updates.
+
[[Image:racer_lookup.png]]
+
 
+
==== Download the USCSA member csv ====
+
It is '''critically important''' that your race contains ''USCSA numbers'' and proper ''team abbreviations'' for '''ALL''' USCSA members.  The easiest way to find the USCSA numbers and team abbreviations is to look them up in these CSV files.
+
 
+
'''If you cannot find the competitor in the appropriate CSV file for your division:'''
+
*Do '''not''' make one up
+
*Do '''not''' put in some place holder value
+
*'''Do''' contact the national office - there is probably an issue with the competitor's registration that is causing them to not show up in the list.
+
 
+
[http://results.uscsa.com/complists/ Download csv lists]
+
  
 
== How to create a USCSA race in SplitSecond National/FIS ==
 
== How to create a USCSA race in SplitSecond National/FIS ==
Line 92: Line 70:
  
 
[[Image:race_setup.png]]
 
[[Image:race_setup.png]]
 +
 +
Select the Factors/Lists tab
 +
Download a USCSA points list and the current USSA points list
 +
*Select the current USSA points list
 +
 +
[[Image:race_setup_points_lists.png]]
  
 
==== Add competitors to the race ====
 
==== Add competitors to the race ====
  
 
Fill in the racer's information as you normally would, plus '''ALL''' additional USCSA-specific data
 
Fill in the racer's information as you normally would, plus '''ALL''' additional USCSA-specific data
*Fill in the racer's USCSA number.  A USCSA number '''MUST''' be provided for '''EVERY''' competitor that is scored by USCSA.  (see [[#How_to_lookup_USCSA_numbers|This section]] for information on finding USCSA numbers)
+
*Fill in the racer's last nameSelect the matching name from the box on the right.
*Fill in the racer's Team, using the abbreviation for the member's schoolThis abbreviation '''MUST''' match the abbreviation known by the scoring system, or the results will be rejected. (see [[#How_to_lookup_USCSA_numbers|This section]] for information on finding team abbreviations)
+
[[Image:racer_registration.png]]
*Set the racer's USCSA class
+
 
 +
If data from both lists matched the following fields will be filled out correctly
 +
*USSA number
 +
*USCSA number
 +
*Year of birth
 +
*USSA points
 +
*Team (This will be the school abbreviation not 'USA')
 +
*USSA Class
 +
 
 +
*A USCSA number '''MUST''' be provided for '''EVERY''' competitor that is scored by USCSA.  If a racer does not have a USCSA number, verify that you selected the correct USSA athleteIf you are sure that you have the correct athlete [[#Getting_help_or_providing_feedback|Contact the national office]] to resolve the discrepancy.
 +
 
 +
*Set the racer's [[#Competitor_Classes|USCSA class]]
 
**Use 'A' for a normal scoring team
 
**Use 'A' for a normal scoring team
 
**Use 'B' for a second non-scoring team
 
**Use 'B' for a second non-scoring team
 
**Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
 
**Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
 
**Use 'Individual' for single racer team
 
**Use 'Individual' for single racer team
[[Image:racer_registration.png]]
+
[[Image:racer_registration2.png]]
 +
 
 +
==== Submitting the race ====
 +
 
 +
Click the 'Send to USCSA' button on the Competitor tab
 +
[[Image:submit_race.png]]
 +
 
 +
Fill in the race information and click 'Send'.  Use the Race Code assigned to your race when you set it up with the [http://www.uscsa.com/conferences-events/add-race Race Registration] Page - not the USSA race code.
 +
 
 +
[[Image:submit_race2.png]]
  
 
==== Import competitors into the race ====
 
==== Import competitors into the race ====
 +
''This is only recommended for user with more familiarity with National/FIS''
 
*Create a csv file with competitor information
 
*Create a csv file with competitor information
 
[[Image:csv_example.png]]
 
[[Image:csv_example.png]]
Line 127: Line 132:
 
*Set a field on the group
 
*Set a field on the group
 
[[Image:nafis_blockedit.png]]
 
[[Image:nafis_blockedit.png]]
 
==== Submitting the race ====
 
 
Click the 'Send to USCSA' button on the Competitor tab
 
[[Image:submit_race.png]]
 
 
Fill in the race information and click 'Send'.  Use the Race Code assigned to your race when you set it up with the [http://www.uscsa.com/conferences/add-race.html Race Registration] Page - not the USSA race code.
 
 
[[Image:submit_race2.png]]
 
  
 
== How to create a USCSA race in SplitSecond's Ski Club ==
 
== How to create a USCSA race in SplitSecond's Ski Club ==
Line 146: Line 142:
 
*USCSA Event
 
*USCSA Event
 
*This race includes team scoring (using USCSA Team Scoring)
 
*This race includes team scoring (using USCSA Team Scoring)
 +
*Click on the button labeled "Download USCSA List"
  
 
[[Image:race_registration_sc.png]]
 
[[Image:race_registration_sc.png]]
Line 153: Line 150:
 
Fill in the racer's information as you normally would, plus '''ALL''' additional USCSA-specific data
 
Fill in the racer's information as you normally would, plus '''ALL''' additional USCSA-specific data
 
*Make separate race files for Ladies' and Men's racer (Otherwise the team scoring will include both men and women)
 
*Make separate race files for Ladies' and Men's racer (Otherwise the team scoring will include both men and women)
*Fill in the racer's USCSA number.  A USCSA number '''MUST''' be provided for '''EVERY''' competitor that is scored by USCSA.  (see [[#How_to_lookup_USCSA_numbers|This section]] for information on finding USCSA numbers)
+
*Fill in the racer's last name.  Ski Club will search the USCSA list for a matching nameSelect the correct racer/team entry from the box on the right.  This will fill in all the fields except for class.
*Fill in the racer's Team, using the abbreviation for the member's school.  This abbreviation '''MUST''' match the abbreviation known by the scoring system, or the results will be rejected. (see [[#How_to_lookup_USCSA_numbers|This section]] for information on finding team abbreviations)
+
*A USCSA number '''MUST''' be provided for '''EVERY''' competitor that is scored by USCSA.  [[#Getting_help_or_providing_feedback|Contact the national office]] if a racer does not appear on the USCSA list.
*Set the racer's USCSA class
+
[[Image:racer_registration_sc.png]]
 +
*Set the racer's [[#Competitor_Classes|USCSA class]]
 
**Use 'A' for a normal scoring team
 
**Use 'A' for a normal scoring team
 
**Use 'B' for a second non-scoring team
 
**Use 'B' for a second non-scoring team
 
**Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
 
**Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
 
**Use 'Individual' for single racer team
 
**Use 'Individual' for single racer team
[[Image:racer_registration_sc.png]]
+
[[Image:racer_registration_sc2.png]]
 +
 
 +
==== Submitting the race ====
 +
 
 +
Click the 'Send to USCSA' button on the Competitor tab
 +
[[Image:submit_race_sc.png]]
 +
 
 +
Fill in the race information and click 'Send'.  Use the Race Code assigned to your race when you set it up with the [http://www.uscsa.com/conferences-events/add-race Race Registration] Page.
 +
[[Image:submit_race_sc2.png]]
  
 
==== Import competitors into the race ====
 
==== Import competitors into the race ====
 +
''This is only recommended for user with more familiarity with Ski Club''
 
*Create a csv file with competitor information
 
*Create a csv file with competitor information
 
[[Image:csv_example.png]]
 
[[Image:csv_example.png]]
Line 184: Line 191:
 
[[Image:skiclub_blockedit.png]]
 
[[Image:skiclub_blockedit.png]]
  
==== Submitting the race ====
+
== How to lookup USCSA numbers ==
 +
It is '''critically important''' that your race contains ''USCSA numbers'' for '''ALL''' USCSA members and proper ''team abbreviations'' for '''ALL''' USCSA members scored as class "A" or "B" competitors.  The easiest way to find the USCSA numbers and team abbreviations is to look them up in SplitSecond using the USCSA competitor list '''(see the instructions above)'''.
  
Click the 'Send to USCSA' button on the Competitor tab
+
'''If you cannot find the competitor in SplitSecond or you have errors for a particular competitor when submitting the results:'''
[[Image:submit_race_sc.png]]
+
*Do '''not''' make up a USCSA number
 +
*Do '''not''' put in some place holder value
 +
*Do '''not''' change the competitor's class to "Guest" (unless they really are a guest)
 +
*'''Do''' contact the national office - there is probably an issue with the competitor's registration that is causing them to not show up in the list.
  
Fill in the race information and click 'Send'. Use the Race Code assigned to your race when you set it up with the [http://www.uscsa.com/conferences/add-race.html Race Registration] Page.
+
If SplitSecond is not the right answer for you, there are other methods described below.
[[Image:submit_race_sc2.png]]
+
 
 +
==== Individual racer lookup on uscsa.com ====
 +
Use the competitor search function on [http://www.uscsa.com/uscsa-results this page]
 +
<!--[[Image:racer_lookup.png]]-->
 +
 
 +
==== Download the USCSA member csv ====
 +
This is the same list that SplitSecond uses.  If you have an updated list in SplitSecond, you won't find any additional information in here.  This might be useful for people who want to generate running orders or other automated tasks.
 +
 
 +
[http://results.uscsa.com:8080/RaceNetData/CompetitorList/ Download CSV list]
  
 
== After submitting the race ==
 
== After submitting the race ==
An e-mail will be sent to the race organizer within a day or two which will detail the status of scoring.  If there are problems with the submission, a report detailing all the problems will be included.  If there are no problems, then the e-mail will note that the submission was successful, and the results will be available on the [http://www.uscsa.com/conferences/uscsa-results.html Results Page].
+
An e-mail will be sent to the race organizer within a few minutes which will detail the status of scoring.  If there are problems with the submission, a report detailing all the problems will be included.  You may correct the errors and resubmit (see the section below).  If there are no problems, then the e-mail will note that the submission was successful, and the results will be available on the [http://www.uscsa.com/conferences/uscsa-results.html Results Page].  If you don't receive an e-mail within an hour, get in touch with James (see [[#Getting_help_or_providing_feedback|this section]]), and note the race code.
 +
 
 +
=== Correcting Errors ===
 +
Here are some common errors, and hints on how to fix them.
 +
 
 +
;Must supply USCSA number for all scored racers
 +
:If a competitor is assigned any [[#Competitor_Classes|class]] besides Unscored/Guest, a USCSA number must be supplied.  This is used to match up all the results for the season and across seasons.
 +
;No such USCSA Competitor or wrong USCSA ID
 +
:Check to make sure that the USCSA you supplied is correct for the racer.  Maybe you missed a digit, or got some numbers out of order.  It is also possible that the competitor recently registered and the scoring system has not received an updated competitor list yet.
 +
;Competitor does not exist for this Division and Season.
 +
:The USCSA number you entered is valid, but that competitor is not a member of this division.  This could mean: a) that you mistyped the USCSA number and it matched someone else's USCSA number, in which case you should correct the number, b) the competitor is registered incorrectly, in which case you should [[#Getting_help_or_providing_feedback|contact James and the national office]] to correct the issue, c) the competitor is a guest from a different division, in which case you should change the competitor's class to Unscored/Guest, or d) you got your male/female race codes for the weekend backwards.
 +
;Team abbreviation does not exist for this Division and Season
 +
:The abbreviation used is not recognized.  You must use the [[#How_to_lookup_USCSA_numbers|assigned abbreviation]].  If you don't like the assigned abbreviations, [[#Getting_help_or_providing_feedback|get in touch with James]] to change them.
 +
;Incomplete submission.  Fill all required fields and try again.
 +
:Make sure the USCSA header (USCSA race code, race date, race type, description line 1, race admin's name, email and phone number) is filled out, and that there are results in the race you are submitting.
 +
;Invalid race code format OR Race does not exist for that race code
 +
:Use the race code that was assigned when you [[#How_to_create_a_USCSA_race_from_the_registration_website|created the race]].
 +
;Results for this race have already been submitted.
 +
:If you meant to make a change to results that you already posted, [[#Getting_help_or_providing_feedback|get in touch with James]] and let him know.  If not, make sure you have your race codes straight.
 +
;Malformed time.
 +
:Assuming you are using SplitSecond, you should never get this error.  [[#Getting_help_or_providing_feedback|Get in touch with James]] immediately if you do.
 +
 
 +
== Setting up combined scoring rules ==
 +
In order for combined results (qualifications, rankings, divisional overall standings) to be calculated, your division must select scoring rules.  For this season, send your selections to James Cialdea by e-mail (see [[#Getting_help_or_providing_feedback|this section]]).  You may have different rules for the Men and Ladies - that is not a problem, just provide information for each and we will take care of the rest.
 +
 
 +
The available rules are described below.  If you use a different rule, include that information in the e-mail.  You may select one rule and up to three tie breakers for Individual and Team combined scoring.  You do not need to select three tie breakers if your division does not have rules for three levels of ties.
 +
 
 +
In other words, fill in this grid:
 +
* Conference Name:
 +
* Division Name:
 +
* Team Combined Rules
 +
** Rule: (select one from Team Combined Rules)
 +
** Tiebreaker 1: (select one from Team Combined Rules, or leave blank)
 +
** Tiebreaker 2: (select one from Team Combined Rules, or leave blank)
 +
** Tiebreaker 3: (select one from Team Combined Rules, or leave blank)
 +
* Individual Combined Rules
 +
** Rule: (select one from Individual Combined Rules)
 +
** Tiebreaker 1: (select one from Individual Combined Rules, or leave blank)
 +
** Tiebreaker 2: (select one from Individual Combined Rules, or leave blank)
 +
** Tiebreaker 3: (select one from Individual Combined Rules, or leave blank)
 +
 
 +
 
 +
Example:
 +
<pre>
 +
Conference Name: Rocky Mountain
 +
Division Name: Rocky Mountain
 +
 
 +
Team Combined Rules
 +
  Rule: Team Finish Place Sum
 +
 
 +
Individual Combined Rules
 +
  Rule: World Cup Top 30
 +
</pre>
 +
 
 +
=== Individual Combined Rules ===
 +
For Individual Combined scoring, the following rules are available:
 +
;Linear, top 30
 +
:Points are assigned to the top 30 finishers, counting down linearly from 30. (1st = 30, 2nd = 29, ... , 29th = 2, 30th = 1, 31st = 0, ... , last = 0).  The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
 +
;Linear, top 15
 +
:Points are assigned to the top 15 finishers, counting down linearly from 15. (1st = 15, 2nd = 14, ... , 14th = 2, 15th = 1, 16st = 0, ... , last = 0).  The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
 +
;World Cup, top 30
 +
:Points are assigned to the top 30 finishers using the World Cup point scale (see [http://en.wikipedia.org/wiki/FIS_Alpine_Ski_World_Cup#World_Cup_scoring_system this wiki article] - the scale used is the "current system"). The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
 +
;Continental, top 15
 +
:Points are assigned to the top 15 finishers using the World Cup point scale (see [http://en.wikipedia.org/wiki/FIS_Alpine_Ski_World_Cup#World_Cup_scoring_system this wiki article] - the scale used is the "top 15 system"). The racer's points are summed over all races in the division.  The highest sum is the leader.  Racers with 0 points are not ranked.
 +
;Race Points
 +
:Sum of race points from FIS/USSA/USCSA formula, lowest score wins.  Racers who do not participate in a race are counted as "DNS", and will take 990.00 points for that race.  (Note: USCSA points are calculated and displayed in results for all USCSA-scored races regardless of whether this option is used.)
 +
;No scoring
 +
:Combined results are not calculated
 +
 
 +
=== Team Combined Rules ===
 +
For Team Combined scoring, the following rules are available:
 +
;Team Finish Place Sum
 +
:Each team is assigned place points for each race equal to the team ranking at that race.  The sum of finish places for all races is used for combined ranking.  The lowest sum wins.
 +
;Individual Finish Place Sum
 +
:Sum of finish places for all racers using in scoring for all races.  Dummy finish places will be applied for teams that do not have enough finishers, per USCSA scoring rules.  The lowest sum wins.
 +
;Individual Race Point Sum
 +
:Sum of race points (FIS/USSA/USCSA formula) for all racers used in scoring.  Dummy points will be added for teams that do not have enough finishers.  The dummy points will be the points that would be assigned if a racer finished with the dummy time for the race where the team did not have enough finishers.  The lowest sum wins.
 +
;No scoring
 +
:Combined results are not calculated
 +
 
 +
 
 +
== Regional and National Events ==
 +
The process for scoring Regional and National events is very similar to regular divisional events.  Read the instructions above (if you haven't already) before reading this section.
 +
 
 +
'''Note that the scoring system is currently limited to alpine events,''' so disregard everything on this page if you are looking for information about scoring other events.
 +
 
 +
There are some small changes for scoring Regional and National events:
 +
# Information about which competitors and teams will be attending each Regional Championship and National Championship event must be sent to James (see below for contact information) in advance.  Include the following information in an e-mail as soon as possible:
 +
#* Region name (if not the national event)
 +
#* Qualified Men's teams (just the school name is sufficient, the individual athletes' names do not need to be included)
 +
#* Qualified Ladies' teams (just the school name is sufficient, the individual athletes' names do not need to be included)
 +
#* Abbreviations for each team, including teams represented by an individual competitor. (If not provided, abbreviations will be assigned by using the team's abbreviations from within their home division.  Any conflicts will be addressed manually.)
 +
#* Individual Men and Ladies (include USCSA number and name.  You may include "alternate" individuals if you are not sure who will be at the race.  Competitors will not show up in the standings unless they show up at the race, but the results will be rejected unless all competitors are registered in the scoring system.)
 +
# [[#Download_the_USCSA_member_csv|CSV files]] for populating the running order will be available AFTER the list of qualified teams and individuals has been processed by James.  He will probably e-mail you when they are ready.
 +
# When creating a race code for a regional event, the "conference" will be "Regional Championships", and the "division" will be the name of the region followed by the proper gender for the race
 +
# When creating a race code for a national event, the "conference" will be "National Championships", and the "division" will be the proper gender for the race
 +
 
 +
For most regions - competitors should be assigned to either "A" or "Individual" [[#Competitor_Classes|classes]] for team member status or individual competitor status, respectively. However, there is nothing restricting the use of other classes, and all classes will be scored as they are described [[#Competitor_Classes|above]].
  
 
== Getting help or providing feedback ==
 
== Getting help or providing feedback ==
If you have problems, questions, praise, or suggestions:
+
If you have problems, questions, praise, or suggestions contact the results team:
* Contact James Cialdea ( j at jimbodude dot net  OR  jamescialdea at gmail dot com )
+
* Contact the USCSA results team ( results at uscsa dot com )
** About adding new races with the [http://www.uscsa.com/conferences/add-race.html Add Race] Page
+
** About adding new races with the [http://www.uscsa.com/conferences-events/add-race Add Race] Page
 
** About errors in posted results or questions about how results are scored
 
** About errors in posted results or questions about how results are scored
 
** About suggestions for features or new result summaries
 
** About suggestions for features or new result summaries
 
* Contact Eric Millbrandt ( emillbrandt at coldhaus dot com )
 
 
** About using SplitSecond
 
** About using SplitSecond
 
** About setting up USCSA races in SplitSecond
 
** About setting up USCSA races in SplitSecond
 
** About inserting USCSA Numbers and Team Abbreviations into SplitSecond races
 
** About inserting USCSA Numbers and Team Abbreviations into SplitSecond races
** You should also copy James and Andy
 
 
* Contact Andy Rangen ( arangen at uscsa dot com )
 
 
** About formatting of results on the [http://www.uscsa.com/conferences/uscsa-results.html Results] Page
 
** About formatting of results on the [http://www.uscsa.com/conferences/uscsa-results.html Results] Page
 
** About errors appearing on the Add Race or Results Pages
 
** About errors appearing on the Add Race or Results Pages
** You should also copy James
 
  
* Contact the National Office ( LauraSullivan at uscsa dot com )
+
* Contact the National Office ( help at uscsa dot com )
 
** If you cannot find a USCSA number for a USCSA competitor
 
** If you cannot find a USCSA number for a USCSA competitor
 
** If you cannot find a team abbreviation for a USCSA team
 
** If you cannot find a team abbreviation for a USCSA team
** You should also copy James and Andy
+
** You should also copy the results team
 
+
  
 
== How to setup your race to be on Live-Timing.org ==
 
== How to setup your race to be on Live-Timing.org ==

Latest revision as of 16:33, 5 February 2019

Competitor Classes

For each race submission, every participating competitor must be assigned one of 5 classes. This class assignment will determine how scoring is handled for the competitor, and the competitor's team. The classes are:

A
For all A-team members. Only USCSA members may be marked with the "A" class, and a USCSA number must be provided with the submission. A-team members with the same team abbreviation make up that school's A-team. This team will be used to create team results. The team results will be used in the divisional standing calculations. Each competitor is eligible to score individually. Each competitor that scores individually will be included in the divisional individual standings. All A-team competitors will receive USCSA race points.
B
For all B-team members. Only USCSA members may be marked with the "B" class, and a USCSA number must be provided with the submission. B-team members with the same team abbreviation make up that school's B-team. This team will not be used to create team results. The team results will not be used in the divisional standing calculations. Each competitor is not eligible to score individually. All B-team competitors will receive USCSA race points.
Individual
For all individually qualified members. Only USCSA members may be marked with the "Individual" class, and a USCSA number must be provided with the submission. Individual entries will not be used to create team results. The team results will not be used in the divisional standing calculations. Each competitor is eligible to score individually. Each competitor that scores individually will be included in the divisional individual standings. All Individual competitors will receive USCSA race points.
Unscored/Guest
For all non-USCSA members, as well as USCSA competitors from divisions other than the division running the event. USCSA or non-USCSA members may be marked with the "Unscored/Guest" class. If the competitor is a USCSA member, then a USCSA number should be provided. Unscored/Guest entries will not be used to create team results. Each Unscored/Guest competitor is not eligible to score individually. Unscored/Guest competitors will receive USCSA race points if they are USCSA members and a USCSA number has been provided. Unscored/Guest competitors will not receive USCSA race points if a USCSA number has not been provided.
AA
For all AA-team members. This class should not be used by most divisions. Only USCSA members may be marked with the "AA" class, and a USCSA number must be provided with the submission. AA-team members with the same team abbreviation make up that school's AA-team. This team will be used to create team results for the race. The team results will not be used in the divisional standing calculations. Each competitor is eligible to score individually. Each competitor that scores individually will be included in the divisional individual standings. All AA-team competitors will receive USCSA race points.
USCSA scoring classes
Class Times Team Result for Race Team Result in Divisional Standings Individual Result in Divisional Standings Receive USCSA Race Points
A Yes Yes Yes Yes Yes
B Yes No No No Yes
Individual Yes No No Yes Yes
Unscored/Guest Yes No No No If USCSA member
AA Yes Yes No Yes Yes

How to create a USCSA race in SplitSecond National/FIS

Download National/FIS

SplitSecond National/FIS

Configure National/FIS for USCSA races

Fill in the header information as you normally would for a normal USSA race. Check the following boxes at the bottom

  • USCSA Event
  • Show USCSA Class on Competitor tab instead of Class
  • Show USCSA Number on Competitor tab instead of USSA/FIS Number

Race setup.png

Select the Factors/Lists tab Download a USCSA points list and the current USSA points list

  • Select the current USSA points list

Race setup points lists.png

Add competitors to the race

Fill in the racer's information as you normally would, plus ALL additional USCSA-specific data

  • Fill in the racer's last name. Select the matching name from the box on the right.

Racer registration.png

If data from both lists matched the following fields will be filled out correctly

  • USSA number
  • USCSA number
  • Year of birth
  • USSA points
  • Team (This will be the school abbreviation not 'USA')
  • USSA Class
  • A USCSA number MUST be provided for EVERY competitor that is scored by USCSA. If a racer does not have a USCSA number, verify that you selected the correct USSA athlete. If you are sure that you have the correct athlete Contact the national office to resolve the discrepancy.
  • Set the racer's USCSA class
    • Use 'A' for a normal scoring team
    • Use 'B' for a second non-scoring team
    • Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
    • Use 'Individual' for single racer team

Racer registration2.png

Submitting the race

Click the 'Send to USCSA' button on the Competitor tab Submit race.png

Fill in the race information and click 'Send'. Use the Race Code assigned to your race when you set it up with the Race Registration Page - not the USSA race code.

Submit race2.png

Import competitors into the race

This is only recommended for user with more familiarity with National/FIS

  • Create a csv file with competitor information

Csv example.png

  • Enter the National/FIS import screen

Natfis menu.png

Label the columns that you want to import

  • Team
  • Last
  • First
  • USSA Number
  • USCSA Number
  • Bib
  • etc...

Natfis import.png

Using block edit to update multiple competitors

  • Click a racer with the left mouse button and highlight a group of competitors
  • Click the 'Block Edit' button (Note: This is the same button as 'Edit Comp' normally)
  • Set a field on the group

Nafis blockedit.png

How to create a USCSA race in SplitSecond's Ski Club

Download Ski Club

SplitSecond Ski Club

Configure Ski Club for USCSA races

Fill in the header information as you normally would for a normal race. Check the following boxes at the top and bottom

  • USCSA Event
  • This race includes team scoring (using USCSA Team Scoring)
  • Click on the button labeled "Download USCSA List"

Race registration sc.png

Add competitors to the race

Fill in the racer's information as you normally would, plus ALL additional USCSA-specific data

  • Make separate race files for Ladies' and Men's racer (Otherwise the team scoring will include both men and women)
  • Fill in the racer's last name. Ski Club will search the USCSA list for a matching name. Select the correct racer/team entry from the box on the right. This will fill in all the fields except for class.
  • A USCSA number MUST be provided for EVERY competitor that is scored by USCSA. Contact the national office if a racer does not appear on the USCSA list.

Racer registration sc.png

  • Set the racer's USCSA class
    • Use 'A' for a normal scoring team
    • Use 'B' for a second non-scoring team
    • Use 'Unscored/Guest' for non-USCSA competitors (The Team will automatically be set to "NONE")
    • Use 'Individual' for single racer team

Racer registration sc2.png

Submitting the race

Click the 'Send to USCSA' button on the Competitor tab Submit race sc.png

Fill in the race information and click 'Send'. Use the Race Code assigned to your race when you set it up with the Race Registration Page. Submit race sc2.png

Import competitors into the race

This is only recommended for user with more familiarity with Ski Club

  • Create a csv file with competitor information

Csv example.png

  • Enter the National/FIS import screen

Skiclub menu.png

Label the columns that you want to import

  • Team
  • Last
  • First
  • Member#
  • Bib
  • etc...

Skiclub import.png

Using block edit to update multiple competitors

  • Click a racer with the left mouse button and highlight a group of competitors
  • Click the 'Block Edit' button (Note: This is the same button as 'Edit Comp' normally)
  • Set a field on the group

Skiclub blockedit.png

How to lookup USCSA numbers

It is critically important that your race contains USCSA numbers for ALL USCSA members and proper team abbreviations for ALL USCSA members scored as class "A" or "B" competitors. The easiest way to find the USCSA numbers and team abbreviations is to look them up in SplitSecond using the USCSA competitor list (see the instructions above).

If you cannot find the competitor in SplitSecond or you have errors for a particular competitor when submitting the results:

  • Do not make up a USCSA number
  • Do not put in some place holder value
  • Do not change the competitor's class to "Guest" (unless they really are a guest)
  • Do contact the national office - there is probably an issue with the competitor's registration that is causing them to not show up in the list.

If SplitSecond is not the right answer for you, there are other methods described below.

Individual racer lookup on uscsa.com

Use the competitor search function on this page

Download the USCSA member csv

This is the same list that SplitSecond uses. If you have an updated list in SplitSecond, you won't find any additional information in here. This might be useful for people who want to generate running orders or other automated tasks.

Download CSV list

After submitting the race

An e-mail will be sent to the race organizer within a few minutes which will detail the status of scoring. If there are problems with the submission, a report detailing all the problems will be included. You may correct the errors and resubmit (see the section below). If there are no problems, then the e-mail will note that the submission was successful, and the results will be available on the Results Page. If you don't receive an e-mail within an hour, get in touch with James (see this section), and note the race code.

Correcting Errors

Here are some common errors, and hints on how to fix them.

Must supply USCSA number for all scored racers
If a competitor is assigned any class besides Unscored/Guest, a USCSA number must be supplied. This is used to match up all the results for the season and across seasons.
No such USCSA Competitor or wrong USCSA ID
Check to make sure that the USCSA you supplied is correct for the racer. Maybe you missed a digit, or got some numbers out of order. It is also possible that the competitor recently registered and the scoring system has not received an updated competitor list yet.
Competitor does not exist for this Division and Season.
The USCSA number you entered is valid, but that competitor is not a member of this division. This could mean: a) that you mistyped the USCSA number and it matched someone else's USCSA number, in which case you should correct the number, b) the competitor is registered incorrectly, in which case you should contact James and the national office to correct the issue, c) the competitor is a guest from a different division, in which case you should change the competitor's class to Unscored/Guest, or d) you got your male/female race codes for the weekend backwards.
Team abbreviation does not exist for this Division and Season
The abbreviation used is not recognized. You must use the assigned abbreviation. If you don't like the assigned abbreviations, get in touch with James to change them.
Incomplete submission. Fill all required fields and try again.
Make sure the USCSA header (USCSA race code, race date, race type, description line 1, race admin's name, email and phone number) is filled out, and that there are results in the race you are submitting.
Invalid race code format OR Race does not exist for that race code
Use the race code that was assigned when you created the race.
Results for this race have already been submitted.
If you meant to make a change to results that you already posted, get in touch with James and let him know. If not, make sure you have your race codes straight.
Malformed time.
Assuming you are using SplitSecond, you should never get this error. Get in touch with James immediately if you do.

Setting up combined scoring rules

In order for combined results (qualifications, rankings, divisional overall standings) to be calculated, your division must select scoring rules. For this season, send your selections to James Cialdea by e-mail (see this section). You may have different rules for the Men and Ladies - that is not a problem, just provide information for each and we will take care of the rest.

The available rules are described below. If you use a different rule, include that information in the e-mail. You may select one rule and up to three tie breakers for Individual and Team combined scoring. You do not need to select three tie breakers if your division does not have rules for three levels of ties.

In other words, fill in this grid:

  • Conference Name:
  • Division Name:
  • Team Combined Rules
    • Rule: (select one from Team Combined Rules)
    • Tiebreaker 1: (select one from Team Combined Rules, or leave blank)
    • Tiebreaker 2: (select one from Team Combined Rules, or leave blank)
    • Tiebreaker 3: (select one from Team Combined Rules, or leave blank)
  • Individual Combined Rules
    • Rule: (select one from Individual Combined Rules)
    • Tiebreaker 1: (select one from Individual Combined Rules, or leave blank)
    • Tiebreaker 2: (select one from Individual Combined Rules, or leave blank)
    • Tiebreaker 3: (select one from Individual Combined Rules, or leave blank)


Example:

Conference Name: Rocky Mountain 
Division Name: Rocky Mountain

Team Combined Rules
  Rule: Team Finish Place Sum

Individual Combined Rules
  Rule: World Cup Top 30

Individual Combined Rules

For Individual Combined scoring, the following rules are available:

Linear, top 30
Points are assigned to the top 30 finishers, counting down linearly from 30. (1st = 30, 2nd = 29, ... , 29th = 2, 30th = 1, 31st = 0, ... , last = 0). The racer's points are summed over all races in the division. The highest sum is the leader. Racers with 0 points are not ranked.
Linear, top 15
Points are assigned to the top 15 finishers, counting down linearly from 15. (1st = 15, 2nd = 14, ... , 14th = 2, 15th = 1, 16st = 0, ... , last = 0). The racer's points are summed over all races in the division. The highest sum is the leader. Racers with 0 points are not ranked.
World Cup, top 30
Points are assigned to the top 30 finishers using the World Cup point scale (see this wiki article - the scale used is the "current system"). The racer's points are summed over all races in the division. The highest sum is the leader. Racers with 0 points are not ranked.
Continental, top 15
Points are assigned to the top 15 finishers using the World Cup point scale (see this wiki article - the scale used is the "top 15 system"). The racer's points are summed over all races in the division. The highest sum is the leader. Racers with 0 points are not ranked.
Race Points
Sum of race points from FIS/USSA/USCSA formula, lowest score wins. Racers who do not participate in a race are counted as "DNS", and will take 990.00 points for that race. (Note: USCSA points are calculated and displayed in results for all USCSA-scored races regardless of whether this option is used.)
No scoring
Combined results are not calculated

Team Combined Rules

For Team Combined scoring, the following rules are available:

Team Finish Place Sum
Each team is assigned place points for each race equal to the team ranking at that race. The sum of finish places for all races is used for combined ranking. The lowest sum wins.
Individual Finish Place Sum
Sum of finish places for all racers using in scoring for all races. Dummy finish places will be applied for teams that do not have enough finishers, per USCSA scoring rules. The lowest sum wins.
Individual Race Point Sum
Sum of race points (FIS/USSA/USCSA formula) for all racers used in scoring. Dummy points will be added for teams that do not have enough finishers. The dummy points will be the points that would be assigned if a racer finished with the dummy time for the race where the team did not have enough finishers. The lowest sum wins.
No scoring
Combined results are not calculated


Regional and National Events

The process for scoring Regional and National events is very similar to regular divisional events. Read the instructions above (if you haven't already) before reading this section.

Note that the scoring system is currently limited to alpine events, so disregard everything on this page if you are looking for information about scoring other events.

There are some small changes for scoring Regional and National events:

  1. Information about which competitors and teams will be attending each Regional Championship and National Championship event must be sent to James (see below for contact information) in advance. Include the following information in an e-mail as soon as possible:
    • Region name (if not the national event)
    • Qualified Men's teams (just the school name is sufficient, the individual athletes' names do not need to be included)
    • Qualified Ladies' teams (just the school name is sufficient, the individual athletes' names do not need to be included)
    • Abbreviations for each team, including teams represented by an individual competitor. (If not provided, abbreviations will be assigned by using the team's abbreviations from within their home division. Any conflicts will be addressed manually.)
    • Individual Men and Ladies (include USCSA number and name. You may include "alternate" individuals if you are not sure who will be at the race. Competitors will not show up in the standings unless they show up at the race, but the results will be rejected unless all competitors are registered in the scoring system.)
  2. CSV files for populating the running order will be available AFTER the list of qualified teams and individuals has been processed by James. He will probably e-mail you when they are ready.
  3. When creating a race code for a regional event, the "conference" will be "Regional Championships", and the "division" will be the name of the region followed by the proper gender for the race
  4. When creating a race code for a national event, the "conference" will be "National Championships", and the "division" will be the proper gender for the race

For most regions - competitors should be assigned to either "A" or "Individual" classes for team member status or individual competitor status, respectively. However, there is nothing restricting the use of other classes, and all classes will be scored as they are described above.

Getting help or providing feedback

If you have problems, questions, praise, or suggestions contact the results team:

  • Contact the USCSA results team ( results at uscsa dot com )
    • About adding new races with the Add Race Page
    • About errors in posted results or questions about how results are scored
    • About suggestions for features or new result summaries
    • About using SplitSecond
    • About setting up USCSA races in SplitSecond
    • About inserting USCSA Numbers and Team Abbreviations into SplitSecond races
    • About formatting of results on the Results Page
    • About errors appearing on the Add Race or Results Pages
  • Contact the National Office ( help at uscsa dot com )
    • If you cannot find a USCSA number for a USCSA competitor
    • If you cannot find a team abbreviation for a USCSA team
    • You should also copy the results team

How to setup your race to be on Live-Timing.org

Setup your race

Open SplitSecond and click on the "Live Timing" tab

Example1.png

Insert the following information

  • Race Date
  • Start Time
  • State
  • Ski Area Name
  • Race Name
  • Race Type

Now click on "Load Logos from Live-Timing" and select "USCSA-LiveTiming.gif" for the Location Logo and Race Logo. Put in an easy to remember user name and password.

Example2.png

Now click on "Register Race"

Example3.png

Your race is now registered. Click on "Upload Competitors" to publish the racers on the Live-Timing website. Remember to register both the Ladies' and Men's races.

Viewing you race on Live-Timing.org

Example4.png

Editing race infomation after you have registered

Click on the "tools for resorts" link near the top of the page. Example5.png

Find your race and click on "Edit". You will need the username and password you created earlier. Example6.png